features - high reliability for low cost - cheapest available smd-clock-oscillator - frequency stability from +-15 to +-100 ppm available - supply voltage of 5.0, 3.3, 2.5 and 1.8 vdc available - new standard for small low cost oscillators smd-low-cost clock-oscillator series package 5.0 volt 3.3 volt operating temperature range storage temperature range voltage +5.0 vdc +-10% +3.3 vdc +-10% 1.0 ~ 4.0 mhz = 10 ma max. 1.0 ~ 4.0 mhz = 10 ma max. 4.0 ~ 32.0 mhz = 30 ma max. 4.0 ~ 32.0 mhz = 20 ma max. 32.0 ~ 80.0 mhz = 45 ma max. 32.0 ~ 80.0 mhz = 30 ma max. 80.0 ~ 160.0 mhz = 80 ma max. 80.0 ~ 160.0 mhz = 40 ma max. standard option rise and fall time "0" level "1" level "0" level "1" level "0" level "1" level "0" level "1" level ttl cmos standard option rev.02 / march 2010 pin 1 with enable/disable function enable/disable function is high active "1" = enable http://www.petermann-technik.com | info@petermann-technik.com other parameters are available on request / create here your specification 1 ~ 10 ttl 15 ~ 50 pf without enable/disable function "0" = disable load output cmos 3.3 volt - extended temperature range to -40/+105c available frequency range current input -10/+60c ~ -40/+105c -55/+125c sxo-0507 ceramic package 7 x 5 x 1,8 mm3 1.0 ~ 160.0 mhz 1.0 ~ 160.0 mhz 0.1 v (10% vdd) +2.97 v (90%vdd) symmetry ttl 5 volt cmos 5 volt 40/60% 45/55% 5 ns typical / 10 ns max. 0.4 v max. lower input currents are available on request. please indicate the special value when required. frequency stability +-15 ~ +-100 ppm ttl 3.3 volt 0.4 v max. +1.4 v min. +2.4 v min. 0.4 v (10% vdd) +4.5 v (90%vdd)
http://www.petermann-technik.com | info@petermann-technik.com part numbering system example SXO3-0507-s-e-50-w-27.000mhz-t sxo-0507 for 5 volt series SXO3-0507 for 3.3 volt blank for 40/60% symmetry s for 45/55% pin 1 blank for no e/d enable/disable e for e/d blank for 100 ppm frequency stability any 15 ~ 50 ppm blank for 0/+70c n = -10/+60c m = -20/+70c temperature range w = -40/+85c y = -40/+105c frequency frequency in mhz tape and reel -t please see seperate data sheets for the vers ions with 1.8 or 2.5 vdc supply voltage. outline drawing of sxo-0507 5. 0+ 0.2 - 7. 0+0. 2 - 1. 4 #1 #2 #4 #3 2. 6 pi n function #1 #2 #3 #4 en ab le / dis a ble gn d output vcc unit:mm 0. 8 1. 8m ax 5. 08+0 .2 - 1.27 1. 8 5.08 4. 2 2. 0 (*) cby=0. 01 f
http://www.petermann-technik.com | info@petermann-technik.com test circuit cmos test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 c =15pf l note: cl includes probe and fixture capacitance v cc tri-state-input test circuit ttl test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 1n4148 or equiv tri-state-input note: cl includes probe and fixture capacitance v dd r=390 l c =15pf l output wave form cmos (cmos load) tr tf th t v ol duty=th/t v oh 90%v dd 50%v dd 10%v dd output wave form ttl (ttl load) tr tf th t v ol duty=th/t v oh 2.4v 1.4v 0.4v input current v dd 0.01~0.1f gnd 1 oe gnd 4 3 2 v dd out a reflow solder profile 260c 150c 25c ref low 1 to 9c/s preheating time (seconds) 60 200 10s max 1to5c /s t e m p e r a t u r e 1 to 5c/s cooling oscillators can be soldered according to the norm jedec j-std-020c . tape and reel dimensions pull direction 21 .0+0.8 - 13.0+0.2 5. 4+ 0.1 8. 0 + 0.1 1. 7+ 0.1 1. 8+ 0.1 16 .2+0 .3 20 .4 +0 .1 2. 0+ 0.5 - - - - - - - 0. 3+ 0.1 - 2. 0+ 0.1 - 4. 0+ 0.1 - 1. 5+0.1 - 1. 75+0 .1 - 7. 5+0. 1 - 7 .4+ 0.1 - 16.0 +0.2 - 60+5 - 18 0+ 3 - - unit: mm
|